Faulty garage door springs can leave you stranded without a way in or out of the garage. One of our clients in Moline, IL, experienced this very situation. They were preparing to leave when their garage door suddenly snapped shut due to broken springs, leaving their car trapped inside. They contacted us immediately, and we promptly dispatched technicians to work out the problem. We completed the garage door spring replacement in almost an hour, advising the client that poor maintenance was likely the cause of the problem. They thanked Titan Garage Doors Quad Cities and requested routine maintenance from us to prevent future issues.

Your garage door is a key part of your home, so keeping it in good working order is important. A broken garage door spring is a routine issue that a professional can easily fix. The spring may break for several reasons, some of which are preventable. By keeping your garage door well-maintained, you can help avoid this problem.

The Most Common Causes of Broken Garage Door Springs

Normal Wear and Tear

One of the common reasons why garage door springs fail or break is the number of cycles they go through. The average torsion spring, when properly installed, can last for around 10,000 cycles. A cycle occurs when the garage door is opened and then closed again. Even though many people only use their garage door once daily, that still adds up to 730 cycles a year. At this rate, a garage door spring would be exhausted in thirteen and a half years. However, many open and close their door much more frequently than that, reducing the lifespan of the spring significantly. It may even be possible to go through 10,000 cycles in less than a year.

Rust Build-up

The build-up of rust on garage door springs can cause the springs to break more easily and shorten their lifespan. In addition, rust causes friction on the coils, weakening them over time. To prevent spring breakage due to rust, you can spray the coils with a lubricant every few months. It will help keep them lubricated and free from rust build-up.

Improper Upkeep

The springs keep the door in place and allow it to open and close smoothly. Unfortunately, over time, the springs can wear down and break. However, by practicing proper maintenance, you can prolong the life of your garage door springs.

To keep your springs in good condition, lubricate them at least three times a year. You should also check the balance of your garage door regularly, as this can impact how well the door functions.

It is important to regularly check your garage door springs to ensure they are in good working condition. To test them, manually lift the garage door halfway and then let go. The door should stay still without moving. However, if it drops even a bit, the springs are beginning to wear down, and you will need to get them fixed soon.

Use of the Wrong Springs

The correct spring size and wire size are crucial for the proper function of your garage door. Incorrectly sized or installed springs can cause your garage door to fail prematurely. Typically, a spring is on each side of a garage door - one for each panel. It helps to distribute the weight and forces on the door evenly and helps prevent damage caused by a single failed spring.

Some garage door installers use only one long spring across the whole door - but this is not ideal for most doors. The average garage door is best supported by two springs.

Dealing with a broken garage door spring can be a major annoyance. But you do not have to put up with it! Titan Garage Doors Quad Cities provides high-quality, cost-effective garage door repair services. We will have your garage door up and running again in no time. For free estimates, call us today.

Comments:

Titan Garage Doors Quad Cities
https://titangaragedoorsdesmoines.com/
(309) 808-7181
Open Daily 7AM – 7PM
Facebook
Share:
Contact Us